Lion Glass Mosaic Adhesive

DESCRIPTION

  • Lion Glass Mosaic Adhesive is a multipurpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior* floor & wall installations. It is a Cementitious thin set powder to be mixed only with water to install various types of tiles & stone on variety of substrates using Lion Glass Mosaic method of installation.

Areas of Applications

  • Lion Glass Mosaic Adhesive is a multipurpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior floor & wall installations, Swimming Pool.

Features & Benefits

  • Single component, just add water.
  • High strength, polymer modified.
  • Economical & Easy to use.
  • Water and shock resistant.

Suitable Substrates

  • Concrete
  • Concrete Masonry
  • Cement Mortar Beds
  • Cement Plaster

Method of Application

  • The Glass Mosaic adhesive shall be applied to the surface to be tiled with a notched trowel using a scraping motion to work the adhesive into good contact with the surface to be covered.
  • Notch trowel with notches approximately 4mm is recommended to get a bed thickness of 1.5-2mm. V-notch of 3mm also can be used to get bed thickness of 1.5mm.
  • Apply only so much that can be covered with tile within 10- 15 min or while the adhesive surface is still tacky.
  • The Glass Mosaic tiles shall then be set in place and beaten gently with mallet or grouting float to insure 100% full bedding.
  • Tiles shall be aligned to achieve uniform joints and then allowed to set until firm.
  • The face of the sheets of front mounted glass mosaic tiles shall then be dampened and the face mount paper can be removed.
  • Excess adhesive must be cleaned from the surface of the tile with a wet cloth or sponge while the adhesive is fresh and has not hardened. Grouting
  • Grout installation after a minimum of 24 hours. curing time at 70°F (21° C).

Application Mixing

  • Just add 27%-30% water .

Packing

  • 20kg BOPP Export quality Bag.

Coverage

  • Approx 55-60 sft per 20kg bag with 1/4” x 1/4” (6mm x 6mm) square notched trowel for a bed of 3mm. (Coverage will vary depending on trowel notch size, type and size of tile and substrate.)

Precaution & Limitation

  • During cold weather, protect finished work from traffic until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.
  • Not for use directly over particle board, luan, Masonite or hardwood floors.

Shelf Life

  • Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.

Other Products Categories Available

  • Lion brings the widest range of Construction Material & Chemical.







Related Products


Lion Double +
Lion Cool Coat
Lion PP Fiber
Lion Seal And Coating
Lion Floor Hardner
Lion L71