Lion Seal & Coating is Cement based, Single component, Polymer modified, Flexible, Elastomeric waterproof Coating -for Concrete and Masonry surfaces. Lion Seal & Coating is available as a dry powder, and is to be mixed with water before use. It is grey in color and easily applied by brushor sprayed by spray machines.
Areas of Applications
Terrace Water proofing.
Sloping Roofs and Chajjas
Plastered masonry, External walls .
Overhead and underground water tanks.
Toilets& Bathrooms .
Tunnels, Canals, dams etc
Features & Benefits
Heavy duty waterproof coating system on new and existing surfaces.
Forms flexible and washable membrane soon after application.
Highly effective for Positive& negative sides of hydrostatic pressure.
Positive Side Impermeability : 5-7 Bar
Negative Side Impermeability : 1.5 Bar
Effectively seals all existing cracks in the surface
Crack Bridging Capability: O.5mm. Good resistance against UV, Infrared Rays.
Strong adhesion with all Cementitious surfaces including China chips.
Non-Toxic,hence suitable for all types of water retaining structures.
Ease of handling, mixing &application.
Freedom from fungus/moss, improved life of finishing coats and aesthetics
Method of Application
Lion Seal & Coating can be applied to the surface manually by brush. After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat and it must be applied in perpendicular direction to the first coat.
Lion Seal & Coating can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.
Care should be taken to avoid application under direct sunlight. The appropriate application time for the product is either early morning or late evening. This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.
In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.
It is advised to use brush with soft bristle sand after the application the brush should be cleaned properly.
It is very important that proper and thorough mixing of the "Lion Seal and Coating" is done with water before use. Itis advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Take a clean vessel/bucket which does not have any hole or cut and add some water in the empty vessel to ensure no powder gets stuck on the bottom of the vessel and put required quantity of " Lion Seal and Coating " in it.
Mixing Ratio-Mixing water shall be 30-35% of the weight of powder.
Mix both thoroughly to get uniform paste. Ensure that no powder is left unmixed at the bottom of the vessel. The Slurry is now ready for application.
It is desireable to use the material within2 hours.
For bigger jobs, it is advisable to use mechanical stirrer and spray machines. Proper care shall be taken at the time of mixing and spraying to ensure better result.
1 Kg bag
The coverage of the product depends upon the Surface condition, it sroughness and absorption. In normal condition, the coverage of Lion Seal & Coating 10-12 square feet per kg for two coats
Precaution & Limitation
Proper slopes and outlets to drain out rain water are essential.
Mix just enough quantity that can be used within'2 hours so as to avoid wastage of the product.
Additional water should not be added to already mixed material.
In order to get best results, it is recommended not to use "Lion Seal & Coating" in direct sunlight to avoid unnatural evaporation which may lead to cracks.
Average thickness of each coating should not be more than 0.6- 0.8mm. If required, number of coats may be ,increased to achieve higher thickness.
Factory sealed bag of this product are guaranteed to be of first quality for Two (2) year* if stored off the ground in a dry area.*High humidity will reduce the shelf life of bagged product.
Other Products Categories Available
Lion brings the widest range of Construction Material & Chemical.