- Lion Wall Touch (Wall Putty) is a White cement based polymer modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting. As it is white, it can be treated as a base coat for painting.
- Lion wall Touch specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting.
- Excellent Whitest putty
-
Highly water resistant
-
Strong bonding to the base plaster
-
Excellent Smooth finish
-
Excellent workability
-
UV Resistance
-
True color tone of the paint is maintained, primer is not required
-
Protects expensive paint from dampness, peeling off and flaking
-
Makes paint durable
-
Paint finish is superior
-
Suitable for interior as well as exterior
-
Reduces paint consumption
-
Avoid frequent repainting
-
Cost-effective
-
Aesthetic look for ceilings, interior and external walls
-
Ease of use at site
- Dampen the surface to be plastered with clean water. Allow excess water to drain off.
-
Using a steel trowel/blade, apply the above mix to a thickness of about 0.5-1mm level and smoothen the surface.
-
Apply the second coat 0.5-1mm after the first coat has fully dried and set. In areas of high temperature & low humidity for two days is recommended.
-
The thickness of each coat should not exceed 1mm and total plaster thickness should not exceed 2mm.
-
Smoothen with a steel trowel, Sand paper if so desired with 600no. of sand paper
- Pot life 115 minutes
-
Whiteness 90 % +
-
Autoclave expansion Nil
-
Workability good
- .
- Take 300-400 ml of clean water for 1kg of LION WALL TOUCH (wall putty) in a clean bucket. It is very important that Lion Wall Touch to be Added in water and not vice versa.
-
Stir continuously by using an electric mixer or by hand to obtain a homogeneous lump-free paste.
-
Allow the resultant paste to stand for about 10 minutes for the additives to dissolve.
-
Re-mix again for about 2 minutes. The mixture is now ready.
-
Use the mix within 1Hrs
- 20kg, 40kg BOPP Export quality bag.
- We recommend
-
Maximum two coats (Layers) of Lion Wall Touch.
-
Minimum thickness of 1st coat (Layer) 3 to 4 mm.
-
Maximum thickness of 2nd coat (Layer) 3 to 4 mm.
-
Total thickness can go up to 10 mm in 2 Layers.
-
Approximate achievable coverage is 6-7 sqft./kg/3mm however, actual coverage achieved depends on surface condition.
- Although Lion Wall Touch do not contain any toxic material, use rubber gloves while mixing.
-
Precaution should be taken to avoid dust inhalation while handling putty powder or during removal of application marks with fine emery paper-say wearing nose mask.
-
Keep the product out of reach of children.
-
Once putty paste has hardened, it shall not be used by adding water.
- Factory sealed bag of this product are guaranteed to be of first quality for Six month * if stored off the ground in a dry area.
-
Store in a cool & dry place in unopened condition away from direct sunlight
- Lion brings the widest range of Construction Material & Chemical.
