Skip to content
Tile Adhesive

Lion Glass Mosaic Adhesive

Lion Glass Mosaic Adhesive is a multipurpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior* floor & wall...

Lion Glass Mosaic Adhesive
Lion Building SolutionMade in Gujarat, India
CategoryTile Adhesive
Packing20kg BOPP Export quality Bag.
CoverageApprox 55-60 sft per 20kg bag with 1/4” x 1/4” (6mm x 6mm) squ...
Shelf lifeFactory sealed bag of this product are guaranteed to be of first quali...

DESCRIPTION

Lion Glass Mosaic Adhesive is a multipurpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior* floor & wall installations. It is a Cementitious thin set powder to be mixed only with water to install various types of tiles & stone on variety of substrates using Lion Glass Mosaic method of installation.

Areas of Applications

Lion Glass Mosaic Adhesive is a multipurpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior floor & wall installations, Swimming Pool.

Features & Benefits

  • Single component, just add water.
  • High strength, polymer modified.
  • Economical & Easy to use.
  • Water and shock resistant.

Suitable Substrates

  • Concrete
  • Concrete Masonry
  • Cement Mortar Beds
  • Cement Plaster

Method of Application

  • The Glass Mosaic adhesive shall be applied to the surface to be tiled with a notched trowel using a scraping motion to work the adhesive into good contact with the surface to be covered.
  • Notch trowel with notches approximately 4mm is recommended to get a bed thickness of 1.5-2mm. V-notch of 3mm also can be used to get bed thickness of 1.5mm.
  • Apply only so much that can be covered with tile within 10- 15 min or while the adhesive surface is still tacky.
  • The Glass Mosaic tiles shall then be set in place and beaten gently with mallet or grouting float to insure 100% full bedding.
  • Tiles shall be aligned to achieve uniform joints and then allowed to set until firm.
  • The face of the sheets of front mounted glass mosaic tiles shall then be dampened and the face mount paper can be removed.
  • Excess adhesive must be cleaned from the surface of the tile with a wet cloth or sponge while the adhesive is fresh and has not hardened. Grouting
  • Grout installation after a minimum of 24 hours. curing time at 70°F (21° C).

Application Mixing

Just add 27%-30% water .

Packing

20kg BOPP Export quality Bag.

Coverage

Approx 55-60 sft per 20kg bag with 1/4” x 1/4” (6mm x 6mm) square notched trowel for a bed of 3mm. (Coverage will vary depending on trowel notch size, type and size of tile and substrate.)

Precaution & Limitation

  • During cold weather, protect finished work from traffic until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.
  • Not for use directly over particle board, luan, Masonite or hardwood floors.

Shelf Life

Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.

Other Products Categories Available

Lion brings the widest range of Construction Material & Chemical.

In application

Lion Glass Mosaic Adhesive on site

Watch

See Lion in action

Request a quote

Ready to order Lion Glass Mosaic Adhesive?

Tell us about your project and we will reply with pricing, availability and application guidance.

You may also like

Related products

YELLOW 300 View details

YELLOW 300

Lion Tile Adhesive is a Cementations ready-mix powder which is thin-bed and highly tensile...

Learn more
HighBond 400 View details

HighBond 400

Lion High Bond Adhesive is a Cementations ready-mix powder which is thin-bed and a highly...

Learn more
Lion Tile Grout View details

Lion Tile Grout

Cementitious grouts are blend of Portland cement, graded aggregates, fortifiers and color-...

Learn more
Lion L-Poxy Epoxy View details

Lion L-Poxy Epoxy

Epoxy is a three-part system, comprising of PART A, PART B and PART C. For ease of applica...

Learn more
PURPLE 200 View details

PURPLE 200

Highly polymer modified pre packed special tile adhesive for Internal & External wall cl...

Learn more
Lion Stone Filler View details

Lion Stone Filler

Lion Stone Filler is a blend of specially selected cements, polypropylene fibers, fille...

Learn more
Lion Tile Binder LT-22 View details

Lion Tile Binder LT-22

Lion Binder is economical on-site mix additive to be mixed with cement, for fixing tiles...

Learn more
Lion Tile Cleaner LT-44 View details

Lion Tile Cleaner LT-44

This chemical is a pale, aqueous, viscous, nonionic detergent formulation containing no a...

Learn more
Lion Grout Admix Power A-1 View details

Lion Grout Admix Power A-1

Lion Admixture is an acrylic co-polymer emulsion that has been specifically formulated f...

Learn more
Lion Sparkle L-Poxy Epoxy View details

Lion Sparkle L-Poxy Epoxy

Lion Sparkle L-poxy Epoxy in unique system of three components, water wipable, high bondi...

Learn more
Lion Long Lastic View details

Lion Long Lastic

Lion Long Lastic is a high shear and tensile improved PU based cladding adhesive to use on...

Learn more
Get a quote Call