Lion Tuff Create

• Flexible and covers hairline crack. . Water based with high impermeability.
• Can be tinted with a water based stainer.
• UV resistant & very low dirt pick up.
• Possesses anti-fungal & anti-algue properties.
• Aesthetic appeal & protection against water.
• Can with stand temperature shocks & it is non-toxic.

• All types of exterior plastered masonry surfaces, concrete, cement sand renderings, etc.
• Applicable on asbestos sheets.

• Surface Preparation : The surface should be clean from any loose dust particles, grease or any old flaking paints. Any growth of fungus or algae has to be removed by wire brush followed by water cleaning.
• All surface cracks up to 5mm width should be filled with crack seal. Crack more than 5mm and all separation gaps should be filled up with Lion Premium SBR Latex modified mortaroras specified.

• Primer : 1st coat of primer( Lion Premium SBR Latex)
• Finish : Two coats of Lion Tuff Coat.

• 1st coat of Lion Easy Cot—5% dilution with, potable water.
• 2nd coat should be used undiluted lo get required DFT.

35 to 40 sq. Feet In two coat. (Coverage may vary depending upon the texture and porosity of the surface.

1kg. 5kg, 10kg, 20kg

By brush, roller& spray.

• Nature: Single component
• Appearance : White Re coating
• Period : 5—6 hours ( at 30°C)
• Elongation(250 mic. DFT) : >200% (ASTM D 2370)
• Pull offAdhesion : 1.3 Mpa (ASTM D4541)
• Resistance to water Penetration (0.2 Kg/cm )
• Coating thickness : 110-120 mic. DFT for 2 coats

• Shelf life is 12 months from the date of manufacturing.
• Store in shed, protecting from direct sunlight and away from extreme temperature.
• In extremely hot temperature condition, store in a temperature controlled environment(i.e. Less than 30°C)