Lion Wall Touch

Lion wall Touch specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting.

• Excellent Whitest putty
• Highly water resistant
• Strong bonding to the base plaster
• Excellent Smooth finish
• Excellent workability
• UV Resistance
• True color tone of the paint is maintained, primer is not required
• Protects expensive paint from dampness, peeling off and flaking
• Makes paint durable
• Paint finish is superior
• Suitable for interior as well as exterior
• Reduces paint consumption
• Avoid frequent repainting
• Cost-effective
• Aesthetic look for ceilings, interior and external walls
• Ease of use at site

• Dampen the surface to be plastered with clean water. Allow excess water to drain off.
• Using a steel trowel/blade, apply the above mix to a thickness of about 0.5-1mm level and smoothen the surface.
• Apply the second coat 0.5-1mm after the first coat has fully dried and set. In areas of high temperature & low humidity for two days is recommended.
• The thickness of each coat should not exceed 1mm and total plaster thickness should not exceed 2mm.
• Smoothen with a steel trowel, Sand paper if so desired with 600no. of sand paper

• Pot life 115 minutes
• Whiteness 90 % +
• Autoclave expansion Nil
• Workability good
• .

• Take 300-400 ml of clean water for 1kg of LION WALL TOUCH (wall putty) in a clean bucket. It is very important that Lion Wall Touch to be Added in water and not vice versa.
• Stir continuously by using an electric mixer or by hand to obtain a homogeneous lump-free paste.
• Allow the resultant paste to stand for about 10 minutes for the additives to dissolve.
• Re-mix again for about 2 minutes. The mixture is now ready.
• Use the mix within 1Hrs

20kg, 40kg BOPP Export quality bag.

• We recommend
• Maximum two coats (Layers) of Lion Wall Touch.
• Minimum thickness of 1st coat (Layer) 3 to 4 mm.
• Maximum thickness of 2nd coat (Layer) 3 to 4 mm.
• Total thickness can go up to 10 mm in 2 Layers.
• Approximate achievable coverage is 6-7 sqft./kg/3mm however, actual coverage achieved depends on surface condition.

• Although Lion Wall Touch do not contain any toxic material, use rubber gloves while mixing.
• Precaution should be taken to avoid dust inhalation while handling putty powder or during removal of application marks with fine emery paper-say wearing nose mask.
• Keep the product out of reach of children.
• Once putty paste has hardened, it shall not be used by adding water.

• Factory sealed bag of this product are guaranteed to be of first quality for Six month * if stored off the ground in a dry area.
• Store in a cool & dry place in unopened condition away from direct sunlight

Lion brings the widest range of Construction Material & Chemical.